Bianco Horizontal Multi Stage Pump with nXt PRO Pump Controller - BIA-MULTI103NXTP

The pump is a horizontal multistage pressure system pump supplied wired and ready to install. Used especially for supplying water to domestic and commercial installations. Suitable for water supply applications with suction wells, water supply and boosting of domestic systems, agricultural and gardening applications.

Features:

• The new nXt Pro intelligent electronic pump control is fitted and wired to the pump with plug and play leads for automatic starting, stopping and restarting after power loss or water loss.
• The nXt Pro controller has an in-built check valve to prevent water back-flow through the pump.
• Two operating modes: Mode 1 and Mode 2
• In Mode 1 the starting pressure can be adjusted and in Mode 2 both the starting and stopping pressures can be adjusted to fine tune the installation. A pressure tank is required for Mode 2.
• Corrosion resistant pump body, diffuser and impeller.
• Mechanical shaft seal./li>
• Comes complete with plug and play leads.
• 240V single phase TEFC motor with in-built auto reset thermal overload.
• AS/NZS 4020 Drinking Water Approved
• 2 year Bianco Pumps warranty

Controller:

This pump includes the Bianco iCON nXt series of pump controller. The nXt Controller is designed and tested in Australia to ensure operation in the toughest of environments, combining innovative technology with robust proven architecture to guarantee constant supply of pressurised water when and where you need it the most.

• Digital display gives you a real time indication of system pressure
• Anti-cycle Protection
• Dry run protection with auto restart function that tests for water availability every 24hrs
• Anti-seize function if pump has not operated for last 24 hours
• Controller automatically restarts pump after a power failure
• Easy assembly and removal using push-n-connect fitting with U clip
• Over pressure protection turns pump off when 10 bar is reached
• Overload protection

Specifications: